In addition the device, screen and layout sections of the ” xorg. Many DSTN screens use frame acceleration to improve the performance of the screen. The amount of ram required for the framebuffer will vary depending on the size of the screen, and will reduce the amount of video ram available to the modes. One the overall maximum, and another due to the available memory bandwidth of the chip. However, 8 and 24 bit colour depths seem to work fine. If this is a problem, a work around is to remove the ” HWcursor ” option.

Uploader: Arashizahn
Date Added: 26 September 2015
File Size: 47.64 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 24962
Price: Free* [*Free Regsitration Required]

Gamma correction at all depths and DirectColor visuals for depths of 15 or greater with the HiQV series of chipsets. Like the overlays, the Xvideo extension uses a part of the video memory for a second framebuffer.

For 24bpp on TFT screens, the server assumes that a 24bit bus is being used. Using an 8bpp, the colour will then be displayed incorrectly. For x chipsets the server assumes that the TFT bus width is 24bits.

Chips and Technologies 65554 PCI BUS 65554 PCI BUS Win98 דרייבר הורדה בחינם (ver. 6.­0.­0)

It is possible that the chip could be misidentified, particular due to interactions with other drivers in the server. For other screen drawing related problems, try the ” NoAccel ” or one of the XAA acceleration options discussed above. In this case the driver divides the video processors dotclock limitation by the number of 65554 per pixel, so that the limitations for the various colour depths are.


The server will then allow the mode to occupy the whole x LCD. Which is the reason for the drop in the dot clock. This option is only useful when acceleration can’t be used and linear addressing can be used.

In its current form, X can not take advantage of this second display channel. Option “NoAccel” This option will disable the use of any accelerated functions. If this option is removed form xorg. For instance, the line. This serial link allows an LCD screens to be located up to m from the video processor. Many potential programmable clock register setting are unstable.

Most of the Chips and Technologies chipsets are supported by this driver to some degree. However use caution with these options, because there is no guarantee that driving the video processor beyond it capabilities won’t cause damage.

It has the same ID and is identified as a when probed. Many laptops use the programmable clock of the x chips at the console.

You can use the ” SetMClk ” option in your xorg. The ct chipset introduced a new dual channel architecture. This is a debugging option and general users have no need of it.

Information for Chips and Technologies Users

The ” FixPanelSize ” can be used to force the technologirs values into the panel size registers. Alternatively the user can use the ” TextClockFreq ” option described above to select a different clock for the text console. Otherwise it has the the same properties as the You are probably using a dot clock that is too high or too low ; it is also possible that there is interference with a close MCLK. This information will be invaluable in debugging any problems.


This can be found from the log file of a working single-head installation. It should be noted that the dual channel display options of the require the use of additional memory bandwidth, as each display channel independently accesses the video memory.

Information for Chips and Technologies Users

The Xserver assumes that the framebuffer, if used, will be at the top of video ram. This reduces the amount of video ram available to the modes. However these numbers take no account of the extra bandwidth needed for DSTN screens. It might affect some other SVR4 operating systems as well. This technologise gives more memory bandwidth for use in the drawing operations.

However, some machines appear to have this feature incorrectly setup.